This essay will help you to fix a Non-Working Samsung TV Remote. A complete guide on how to fix Samsung TV Remote Won’t Change Channel, Samsung TV Doesn’t Respond to Remote, TV Remote Won’t Pair, or Remote Is Blinking Red Light.
Identifying the cause of the problem is the best way to fix a damaged Samsung TV remote. You may notice, for example, that when you press a button, it does not react. The remote might fail to link with the television, or the sensor could be operational. Troubleshooting or repairing the problem will be complex unless you determine what is causing it.
These include bad batteries, a technical problem with the device, a faulty remote, and a malfunctioning TV sensor. The battery should be the first item you examine to determine the problem. Begin by changing the batteries, cleaning the top edges of the remote, and inspecting the terminals. If the problem continues, try one of these solutions.
You may control your TV while doing these troubleshooting steps by using the Samsung SmartThings app on your phone or a compatible keyboard and mouse.
Methods for dealing with a Samsung TV that does not fix the remote
Try the following troubleshooting procedures if your Samsung TV is not responding to the remote:
Restart your TV
Restarting your tv will reset the system and enable you to start again.
- Turn off the TV.
- Could you unplug it from the power source?
- Wait for around 30 seconds.
- Reconnect the power supply to the TV.
To see what occurs, try turning it on using the remote.
Perform a digital camera test
A digital camera test will allow you to determine if the infrared on the remote is working correctly.
- Turn on your phone’s camera.
- Aim the remote towards the lens of the camera.
- Press a button on the remote.
- The remote’s Infrared eye should illuminate on the camera screen to indicate that it is working.
If the remote works, the problem is with the TV’s remote sensor. If it does not work, the remote is defective. Consider replacing it.
How to fix Samsung TV Remote Sensor
When inspecting the remote sensor, look for any obstructions on your TV between the remote and the sensor. The infrared signal will be blocked if an item is between the two. You could also reboot your tv and try again. Then, follow the steps outlined above.
If you’ve followed all of these steps and the sensor is still not working, return the TV to the vendor if it’s still under warranty. If not, look for a reliable expert who specializes in Samsung TVs.
Samsung Smart TV Remote Touchpad Troubleshooting
The Samsung Smart Touch Remote’s touchpad might lose sensitivity at times. Continual fluctuations in the calibration level might cause the problem. Recalibrating the Smart Touch Remote is a better option.
- Press and hold the NUMBER key for three seconds.
- The calibration procedure will begin, and the remote’s LED will flash twice after calibration.
During the calibration procedure, avoid touching the touchpad. If the problem continues, you may need to calibrate the touchpad regularly.
However, if the remote eventually stops working, it is preferable to replace it with an appropriate replacement remote that is compatible with your TV. You may also use the Omaic universal remote for any Samsung TVs.
How to fix a Non-Pairing Samsung Remote
Resetting a remote that isn’t pairing will fix the problem. Here’s how you should approach it:
- Remove the batteries. If possible, consider using fresh ones.
- Hold the power button for at least 20 seconds while the batteries are removed.
- Depress the power button.
- Replace the batteries.
- Press and hold the Play/Pause and Back buttons to begin the re-linking procedure.
After that:
- Point the remote to the TV’s sensor.
- For at least three seconds, press and hold the Return to Play/Pause buttons simultaneously.
The remote will begin to connect with your Samsung TV. You will notice a notification stating that you have successfully linked the remote to your tv.
What if the red light on your remote is blinking?
When your Samsung TV remote stops working and begin blinking red, you might attempt the following solutions:
- To begin, restart the TV as described in step one above.
- Repeat step four above to pair the remote.
If none of the above works, reset the remote. To begin, remove the batteries from the container. Next, press and hold the Power button for eight seconds. Then, replace the batteries and try using the remote again.
FAQ
How do I reset the Samsung TV remote?
- Turn on the television and press the Home button on the Samsung TV’s remote control.
- Select support and then press Enter.
- On your remote control, choose Self Diagnosis and then press Enter.
- Navigate to the Reset option, then press Enter on your remote control.
- The TV will prompt you for a security PIN. Enter the number using the tv remote. If the PIN is not changed, the default code is 0000. Please remember that if you have reset your password and do not remember it, it is not valid. It is possible to go on.
- Please contact Samsung Customer Care using one of the methods at the bottom of the page to reset your password.
- A warning message will show on the factory reset screen.
- Use the remote’s navigation button to choose Yes, then press the Enter button.
- Please remember that all of your settings, except any network information previously used, will be reset to factory defaults.
- The TV may be switched on and off during a factory reset many times to show a configuration screen.
Why isn’t my TV responding to my remote?
Remote controllers that do not react to or operate your Samsung TV often have lower battery life. Make sure the remote is pointed towards the TV. Other gadgets, certain kinds of illumination, or anything obstructing the TV remote sensor might interfere with the signal.
How can I activate my Samsung TV remote?
To reset the remote:
- Remove the batteries and press the power button for 10 seconds.
- Replace the battery and try using the remote again.
- If you need assistance reaching the battery compartment, see the user handbook.
How can I use my Samsung TV without a remote?
The TV controller buttons are mostly found on the back of the Samsung TV, at the lower right corner of the screen. It allows you to move the pointer up and down as well as left and right. In addition, holding the center button for an extended time will activate the Samsung TV remote.
Conclusion
When your Samsung TV remote stops working, numerous methods exist to diagnose and fix the problem. Begin by changing the batteries, cleaning the remote’s top edges, and inspecting the terminals.
If you’re having trouble with the red light blinking, try pairing the remote again. You may also fix a broken touchpad by calibrating the gadget regularly. Also read how to Fix Sling TV Error Codes.
